x



	KM 512Y Printhead The KM512 Y printhead is a slim version of the KM512X. It is designed for even higher packing density. In a wide-format application it results in a smaller, lighter carriage. This in turn increases the print width, without increasing the physical size of the printer. The lighter weight also results in cost savings in the scanning mechanism. The Y printhead is available for solvent inks in 14pl size, UV inks in 14 and 42pl size, and water based inks in 4pl and 14pl size.

	KM512(Y)N	KM512(Y)AQ	KM512(Y)H
Applicable Ink	Oil / Solvent Ink	Water Based	UV Ink (High Viscosity)
Technology	3 cycle on demand piezo electric drive
Number of Nozzles	512 (256 x 2 lines)
Channel Resolution	70.5μm pitch (360 dpi: 141μm pitch x 2 lines)
Grey Scale	Dependant on model type (X)
Drop Volume	Dependant on model type (X)
Max Frequency	Dependant on model type (X)
Driving Voltage	16 +/- 2 V
Printing Width	36 mm
Drop Velocity	6.0 +/- 0.5m / sec
Dimensions	70 x 59.5 (inc. mount wing 72) x 15mm
Heater (for UV ink)	No	No	Equipped
Recommended Temp	Ambient	Ambient	Under 50 degrees C